Multibreton TDR

Multibreton TDR

MULTIBRETON TDR is an automatic cross-cut saw for marble or granite strips, equipped with up to twelve cutting spindles.

For each cutting cycle, the machine can saw a single strip or two strips simultaneously - even of different length - into items of the desired size.

The Sawing Cycle

The work cycle is completely automated, without the intervention of the operator:

1. The strip to be sawn advances on the roller conveyor.

2. The aligner/pusher aligns the strip and pushes it on the machine’s feeding belt towards the cutting blades. The belt moves the strip under the blades allowing the cut to be performed.

3. The unloader pushes the tiles so obtained on the unloading belt.

The Cutting Spindles

The cast-iron spindle units slide along the bridge on guides in an oil bath, perfectly protected from water.

The spindle positioning is automated, motorized by a screw with lead nuts connected to an electromagnetic clutch and adjusted sequentially for each single spindle unit. Once each spindle has reached the programmed position, it is blocked by a hydraulic mechanism. A pneumatic device can exclude each spindle unit vertically.

On request, the machine can be supplied in a special version with simultaneous positioning of all the spindles instead of sequential adjustment of each single spindle.


Contact us!
Please fill the following form, and we will get back to you shortly.
Please, wait a moment...