Multibreton TC-TD

Multibreton TC-TD: Automatic Cutting line with software Optimization

For plunge-cutting granite and marble slabs, the line consists of two machines positioned in sequence, the MULTIBRETON TC longitudinal saw and the MULTIBRETON TD cross-cutting saw, which work simultaneously guaranteeing high productions.

Depending on production requirements, it is possible to vary the number of cutting spindles. The working cycle is fully automated and can be programmed from the control panel which is provided with color “touch-screen” monitor and technologically advanced software featuring a user-friendly interface.

Upon request this cutting line can be supplied with a software option for optimizing cutting operations.

Multi-Blade Longitudinal Saw

The MULTIBRETON TC cuts the slab which travels on the conveyor belt mounted on side guides. This system ensures the perfect parallelism of each single cut.

Cross Cutting Saw

The MULTIBRETON TD cuts the slab as the spindle holding beam advances at a right-angle to the conveyor belt. The beam travels at a perfect right angle on guides enclosed in an oil bath and protected by a labyrinth seal casing.

Beam motion is controlled by an inverter-controlled motor and two trapezoidal screw synchronized by a shaft. A pusher/aligner for squaring up the strips before cutting is installed at the front end of the machine. This system guarantees the perfect geometry of right-angled workpieces.


Contact us!
Please fill the following form, and we will get back to you shortly.
Please, wait a moment...