Multibreton ACS-ADS

Multibreton ACS-ADS: Automatic Slab Cutting line with software optimization for thick slabs

The ideal cutting line to achieve a high production capacity when plunge-cutting granite and marble thick slabs (6 cm granite - 8 cm marble). This line consists of two cutting machines positioned in sequence, our Multibreton ACS longitudinal saw and our Multibreton ADS cross-cutting saw, which simultaneously cut different slabs guaranteeing a high production capacity.

Depending on the size of the slab to cut and production requirements, it is possible to vary the number of cutting spindles fitted on both cutters. The cutting line production cycle can be programmed and completely automatic.

The machines are equipped with control panels provided with color “touch-screen” monitors and technologically advanced software featuring a fast and intuitive operator-machine interface. Upon request this cutting line can be supplied with a software option for optimizing cutting operations.

Multi Blade Longitudinal Saw

Dimensioning
 
The Multibreton ACS cuts the slab which travels on the conveyor belt mounted on side guides, the cutting spindles rigidly locked to the beam remain in a fixed position.

This cutting system ensures an almost perfect parallelism of the single cuts, a machining necessity when cutting right-angled workpieces.

Cross Cutting Saw

Dimensioning
The Multibreton ADS cuts the slab as the spindle holding beam advances at a right-angle to the conveyor belt. The beam travels at a perfect right angle on guides enclosed in an oil bath and protected by a labyrinth seal casing.

Beam motion is controlled by a variable speed motor and two ball screw assemblies coupled to ball nuts mounted to the two supporting frames of the beam. A shaft coupled to the angle reduction units ensures the ball screw assemblies are synchronized.

A mobile aligner for squaring up the strips before cutting is installed at the front end of the machine opposite the spindle-holding beam.

The aligner travels on roller bearings and is driven by pneumatic cylinders and two rack-pinion couplings which ensure synchronized movement. This system guarantees an almost perfect geometry of right-angled workpieces.

Contact

Contact us!
Please fill the following form, and we will get back to you shortly.
Please, wait a moment...