STRAIGHT edge POLISHING MACHINE FOR NATURAL AND engineered stone
The Comet performs the shaping and polishing with the passage of flat linear profiles and of regular round shape (eg bull, half bull, owl beak, etc.), shaping of particular profiles, double-sided bevelling, calibration, beater, drips and slots on artefacts of natural and agglomerated stone material, positioned horizontally.
A hydraulic control unit activates the movement of the roller shutter transport as well as the 8 polishing spindles (one of which can be equipped with a diamond wheel) and the oscillating unit of the same so that everything works for a long time and perfectly while being under water head .
In addition to the 8 spindles to polish the coast, the Comet is equipped with:
• 1 calibrator / rectifier spindle to be equipped with the appropriate diamond tool to perform one of the following processes (one use excludes the other): a) thickness calibration on lower band b) slot on the front of the edge with disk on calibrator c) profiling of the edge with diamond wheel, but without polish
• 2 roughing mandrels for the preparation of the edge to the shaping with the oscillating mandrels • 1 spindle to run the drip • 4 spindles chamferers (2 lower and 2 upper) • 1 mandrel for swing
Contact us! Please fill the following form, and we will get back to you shortly.